Stainless steel reaction kettles are widely used as pressure vessels in chemical processes such as reaction, evaporation, synthesis, polymerization, saponification, sulfonation, chlorination, and nitration in chemical, food, coating, hot melt adhesive, silicone, paint, pharmaceutical, and petrochemical production, such as reactors, reaction kettles, decomposition pots, polymerization kettles, etc. Stainless steel reaction kettles have the characteristics of rapid heating, high temperature resistance, corrosion resistance, hygiene, no environmental pollution, no need for automatic heating by boilers, and convenient use. They are widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and other industries to complete processes such as vulcanization, nitration, hydrogenation, alkylation, polymerization, and condensation. Based on the full mixing of reacting substances as a prerequisite, stirring devices are required for physical change processes such as heating, cooli

L&B series Lobe pumps not only have the same applications and characteristics as other rotor pumps, but also have its unique application, especially for conveying high viscosity and colloidal media (such as toothpaste, cosmetics, paste food, plaster, grease, printing ink, paint, chemical fiber pulp etc.) The biggest advantage of this kind of pump is that the media transported through it does not change any chemical and physical properties of the material, ensuring the original quality is not affected at all.

For stainless steel multi-layer plate and frame filter press, suitable for the concentration of less than 50% low viscosity, less slag containing liquid for sealing filtration to achieve purification, sterilization, clarification and other fine filter, semi-fine filter requirements, direct selection of micropore filter film, without micropore film filter filtration can achieve the purpose of sterile filtration). In addition to the motor, other parts are made of 304 or 316L high-quality corrosion resistant stainless steel material, which is suitable for filtration of various PH value acid and alkali solutions. This machine applies pressurized sealed filtration, with less filtrate loss, good filtration quality and high efficiency. The filter part is composed of ten layers of filter plate, with large filter area and large circulation; and according to different production processes (primary filter, semi-fine filter and fine filter), the machine has the characteristics of flat thread mesh,

The ultra-sonic multifunctional extraction, concentration and reclamation set is a new product researched and developed by our company while we are producing traditional large-sized multifunctional extraction units. It is mainly used for research and development of new processes in various test plants, scientific section, etc. It has unique functions for small batches. It uses the ultrasonic technology to extract water soluble substances from Chinese plants and other biological tissues. Advantages: short extraction time, low temperature, low content of impurities, high efficiency, etc. The ultrasonic wave is transmitted in sound-transmitting extraction media. The mechanical, thermal and cavitation effects caused make solid granules and biological tissues in the media broken, emulsified and dissolved, so that the activity of biological tissues is maintained, and the evenness of extraction media is greatly enhanced.

Application Sanitary centrifugal pump is widely used in the delivery of various solutions, such as dairy, beer, beverage, medicine, raw Material engineering, fine daily use chemical industry field. The pump is a single suction single stage, centrifugal sanitary pump. Pump shell, impeller meridian Heart design, small resistance, completely eliminated the health dead corner. So it improves the flow rate of the liquid in the pump High overall performance of the pump, and easy to clean, easy disassembly, has excellent sanitary performance, it can meet the production The requirements for sanitary flexible treatment, and have chemical corrosion resistance.

The crystallizer uses imported 304 or 316L to be fabrication. With inner wall of mechanical polishing or electrolyted mirror polishing, outer wall ofall welded structural insulation. outer surface of mirror or matt. The respirator of 0.22 um is installed on the crystallizer. The crystallizer can bear 121℃ high temperature sterilization and disinfection with sanitary pressure meter. The tank body external connection adopts sanitary quick opening connection. The crystallizer has temperature monitor device, two sight lights, cleaning ball and inlet of Ni, temperature connection, etc. Seal of shaft adopts special sanitary mechanical seal design which insures they are not polluted. The crystallize uses adjustment device of frequency conversion with big range adjustment of shaft speed.

A mixing tank is used for stirring, blending, reconciling, homogenizing and other purposes for materials. Stainless steel mixing tanks can be designed with standardized and humanized structures and configurations according to the requirements of production processes. During the mixing process, the mixing tank can realize feed control, discharge control, mixing control and other manual and automatic controls. The mixing tank can also be called a water phase tank and is widely used in industries such as coatings, pharmaceuticals, building materials, chemicals, pigments, resins, food, and scientific research. This equipment can be made of materials such as carbon steel and stainless steel according to the technological requirements of users' products, and heating and cooling devices can be set up to meet different technological and production needs. Heating forms include jacket electric heating and coil heating. This equipment has a reasonable structure design, advanced technology, dura

Applicable range: 1. Used as liquid storage tank, liquid composing tank, temporary storage tank and liquid blending tank etc.According to the heating or cooling requirement ,the tank will  have jacket for requried function  2. Ideal in fields such as foods, dairy products, fruit juice beverages, chemical industry and biological engineering etc. Structure characteristics: 1. Adopt structure of internal tank and external package, with heat preservation materials inside. 2. Materials are all sanitary stainless steel. 3. Humanized structure design and easy to operate. 4. Transition area of interior wall on tank adopts arc for transition to ensure no dead comer of sanitation.

Tube heat exchangers are based on the flow of two fluids inside and outside the tubes, respectively, with heat exchange taking place through the walls of the tubes. This type of heat exchanger consists of a series of tubes, which can be fixed in a frame or suspended in a vessel. The basic construction of a tube heat exchanger includes parts such as tube bundles, shells, headers, tube sheets, receivers and support structures. Among them, the tube bundle is the core part of the heat exchanger and consists of a number of straight tubes or coils, which are arranged in parallel inside the shell to form a number of processes (tube-side). The space inside the shell is called the shell-side and is used to hold the fluid and exchange heat with the fluid inside the tubes through the tube walls.

Double tube sheet heat exchanger has a simple structure and reliable, adaptable, cleaning more convenient, large capacity, able to withstand high temperature and high pressure etc., no dead ends in the heat exchanger, pollution ~ free, easy to clean, small footprint, easy to install. It is the mature technology, heat transfer equipment standardization. Comply with the GDP the reguirements of the pharmaceutical industry, the phamaceutical industry is an ideal heat transfer equipment.

This equipment adopts circulating hot water spray sterilisation, warm water pre-cooling, cold water cooling three-stage treatment or five-stage treatment, equipment specifications can be customized according to user needs. Suitable for continuous sterilizing and cooling of beverages packed in glass bottles, PET bottles and roof-shaped packaging.

The tubular heat exchanger is closed heat exchanger that consists of pipes of different quantities and models in the tube to form different heat exchanging areas .The parts contacting materials are made of high quality stainless steel sus 304 or SUS 316L .The heat exchanger has such without dead corner ,which is in accordance with GMP requirements .it is widely for steam condensation,material heating and cooling in chemical industry .